The ProShield cover adds insulation value to the spa in regions of extreme cold and snow. ProShield covers add approximately two inches of insulation above the standard cover. Relax in the knowledge that the spa is safe and the heat is insulated, even in severe weather conditions.

The foam cores are virgin, polystyrene foam tapered from 6" to 2.5" to allow water to run off. Each foam piece is then grooved and fitted with a galvanized steel channel for support along the hinge. Each foam core is then sealed with a 4 mm polyethylene sheeting to help prevent water absorption. Your ProShield cover will withstand the effects of sun and weather, saving energy with a lower total cost of ownership.